Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Innovative application of bio-based composites in automotive interior and exterior decoration
The automotive industry is promoting the transformation of the industry to a low-carbon and green direction through three core approaches: recycling, reducing the use of petroleum-based materials and technology empowerment. Many leading automotive manufacturers in the world have regarded the application of bio-based materials as an important measure for the development of low-carbon economy and the practice of ESG concept, which not only reflects the commitment of the whole factory to environmental protection and sustainable development, but also shows the active efforts of the automotive
UK plastic packaging tax reform: adopting mass balance accounting to promote chemical recycling
Thanks to the deep industrial base of the European plastic recycling industry and the emphasis on environmental protection, Europe's recycled plastic equipment technology level is world-renowned, and the installed capacity of plastic recycling is also steadily improving. According to the latest report of the European Plastics Recycling Association (PRE), in 2022, the total installed capacity of plastic recycling in Europe will reach 12.5 million tons, although the growth rate has declined year-on-year, but it also maintains 10%.
McDonald's China Unveils New Uniforms Made From Recycled Plastic Bottles
McDonald's China has launched the seventh generation of customized uniforms for its restaurant staff. In the design phase, the company organized four rounds of employee opinion solicitation, attracting the active participation of nearly 100,000 employees, and collected about 40,000 feedback. Starting July 17, employees at nearly 4,000 McDonald's restaurants across the country will dress up and serve customers with a new look. McDonald's China has carried out targeted design for the needs of employees in their work, s
From Export Trade To Local Production, Chinese Cars Have Gone To Sea To Find New Routes
According to the latest data released by the China Association of Automobile Manufacturers, China exported 443,000 vehicles in January 2024, an increase of 47.4% year-on-year. In fact, in 2023, China's auto exports have been "leading all the way", an increase of 57.9%, surpassing Japan for the first time, ranking first in the world. Among them, the annual export of new energy vehicles was 1.203 million, an increase of 77.6%.
Coca-Cola 100% rPET plastic bottle launched in Hong Kong
Coca-Cola has launched a 500ml soft drink bottle in Hong Kong made from 100% recycled rPET, the latest effort by the company to improve the sustainability of its beverage packaging. Coca-Cola has always been committed to its strategic vision of a "waste free world" through bold and innovative sustainable development. The original, sugar-free and plus 500ml versions of Coca-Cola sold in Hong Kong will all switch to 100% recycled PET for the bottle body, with the exception of the cap and label.
Basf's Low Carbon TPU Enable Diverse Applications In Wearables, Automotive and Food
BASF cooperated with Li Ning, a leading professional sports brand in China, to develop a full thermoplastic polyurethane concept shoe (full TPU shoe), which is made entirely of BASF Elastollan® TPU material and can be 100% recycled. Together with Hamee, BASF has developed a bio-based TPU that can be used in the manufacture of mobile phone cases. With a renewable raw material ratio of 53%, the TPU has excellent UV and yellow resistance while maintaining the wear resistance and high transparency of the phone case.
Lego Unveils New Supplier Sustainability Plan
The Supplier Sustainability program builds on Lego's Engagement Reduction program, which was launched in 2014 to help suppliers publish environmental data and reduce their carbon, water and forest impacts. The Lego Supplier Sustainability Plan requires suppliers to take the following actions to reduce carbon emissions: Provides data on carbon emissions associated with products and services purchased by the LEGO Group. Suppliers are asked to provide near-term targets s
Dell Technologies' silent peripherals have up to 65% recycled plastic
Recently, Dell Technologies announced that the use of post-consumer recycled plastic silent keyboard and mouse suite (KM555) and Dell Wired Collaborative keyboard (KB525C) officially launched. According to reports, the two products were previously announced at the Dell Technologies Group Global Summit (DTW). The new Dell Technologies peripherals are designed to work efficiently and smoothly, providing users with a quiet office experience and seamless collaboration. Over the past few years, Dell Technologies has continued to
Henkel Laundry Detergent flexible packaging using 30% PCR recycled plastic
Henkel's laundry detergent is now packaged in a single material film containing 30% PCR, developed jointly by Korozo Group and Ecoplast, to comply with the recycling requirements of the Packaging and Packaging Waste Regulation (PPWR). Ecoplast, a member of the Borealis Group, supplied the PCR material. Its LDPE recycled materials are ISCC Plus and EuCertplast certified, meaning recycled ingredients can be tracked and traced throughout the value chain. The packaging uses the Borcycle CWT100VL grade material because its low ge
Honeywell's Plastic Chemical Recycling
Honeywell has partnered with a number of energy companies and plastic recycling companies to establish recycling plants that use the UpCycle process technology to convert waste plastics into recycled polymer raw materials. Chemical recycling is a process in which waste plastics undergo a series of chemical transformations to regenerate new plastics of the same quality as petroleum-based plastics, also known as "advanced cycle" and "molecular cycle", which are complementary to physical recycling. Of the nearly 370 million ton
Two Shot Plastic Injection Parameters
In recent years, with the development and versatility of the plastic industry. The application range of plastic products is more and more extensive, such as: household appliances, instrumentation, construction equipment, automotive industry, daily hardware and many other fields, the proportion of plastic products is rapidly increasing. However, with the rising trend of plasticization of industrial products and daily products, the strength and accuracy of plastic products are also constantly improving, therefore, in order to make the mold obtain better strength and accuracy, it is necessar
The Importance of Design Angle Lifter of Plastic Injection Mold
In plastic mold design, angle lifter is a common mechanism for ejecting plastic parts that cannot be removed from the mold by direct ejecting. The sloping top is especially suitable for those plastic parts with complex concave shapes, such as mobile phones, automotive interiors and other products. This paper will introduce the design concept, structure, operation flow and maintenance points of the inclined top in detail. The main purpose of angle lifter is to make the inner surface of t
L 'Occitane 100% Transparent r-PET Bottle
French biochemical company CARBIOS, in collaboration with global cosmetics brand L 'Occitane and cosmetic and personal care packaging manufacturer Pinard Beauty Pack, has developed a transparent, recycled polyethylene terephthalate bottle (r-PET bottle) made entirely from an enzymatic depolymerization process. This move marks another step forward on L 'Occitane's path to achieving its 2027 goal of packaging made from 100% post-consumer recycled r-PET. According
We Must Know About Basic Knowledge Of CNC Fine Engraving Machining
CNC engraving machine is good at small plastic injection molds finishing, with ability of milling, grinding, drilling and high-speed tapping, is widely used in 3C industry, plastic molds industry, medical industry and other fields. 1- What is the main difference between CNC engraving and CNC milling? CNC engraving machining and CNC milling machining have adopted milling processing principle. The main difference is in diameter of the tool
How is PCR Carbon Fiber Used In Plastic Automotive Industry?
Growing environmental concerns and the need for sustainable materials, continuous innovation by automotive manufacturers and suppliers, and the increasing viability of post-consumer recycled (PCR) carbon fibers in mass production offer significant advantages for weight reduction, fuel efficiency, and overall sustainability. The rise of PCR carbon fiber in automotive applications Carbon fiber has traditionally been favored in the automotive industry for its lightweight and high-strength properties
What kind of injection molding machine can be called precision injection molding machine?
Injection moulding machines work by melting plastic and pressing it into a mould, then cooling and curing it into shape. This process usually requires high pressure and high temperature conditions. When the plastic is melted and pressed into the mould, it creates an air-compressed area inside the mould, which causes the plastic to fill the mould evenly. As the plastic cools and cures, it becomes hard and strong. When the plastic is fully cured, the mould is opened and the plastic product is removed. What kind of injection moulding machine can be called a
How to identify engineering plastic combustion in the plastics industry?
Different material properties are not the same: So the actual production of the product may also produce a different appearance because of the injection molding machine and the mold and structural design. Other materials are metal, ceramic, glass, they produce texture is also different. I have sorted out some of the belts used in most plastic products on the market, including ABS, PP, PET, PETG, AS, etc., for material identification.
Attention! Medical syringes are made by injection moulds.
Injection-molded medical syringesMedical syringes are widely used in modern medicine, mainly for injecting drugs directly into the human body or extracting body fluids for testing. It is used for drug injection, vaccination, blood collection and transfusion, insulin injection, local anesthesia, emergency treatment, research and experiment.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.