Medical Disposable syringe plastic injection mould

Disposable syringe Plastic Injection Mould, CEETO has a long experience of researching, developing and manufacturing quality injection moulds for MEDICAL DEVICES. For multi-cavity mold tooling, to keep uniform dimension and tight tolerances is critical for those medical parts. We have advanced EDM, WEDM and mirror EDM etc. Tooling equipment to ensure the machining accuracy. For mold design and tooling, we fully consider the function of each part and give best solution for gate design, parting line, location and quantity of ejector pins, Radius etc. We lay out efficient cooling lines for core/cavity, stripper plate, insert to ensure short cycle time. With years of experience, CEETO has developed a technical expertise that guarantees customer of efficient production. If you are planning to develop medical products, CEETO is your ideal partner of mold tooling.

Scope of application:

Disposable Medical Plastic Syringe mould is made of high quality steel, and it is suitable for pumping liquid or injection. This product is only suitable for subcutaneous or intramuscular injection and intravenous blood tests or cosmetic, used by medical personnel, prohibited for other purposes and non-medical personnel.

Basic information for Disposable medical syringe:

Injection material: medical grade PP

Volume: 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml, 100ml

Needle: 16G-27G

Needle material: stainless steel

Shelf life: 5 years

Standard needle size:

Usage:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.

Storage condition:
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.

Machining equipment:

FAQ:

Q1: How do you control quality of Disposable syringe mould quality?

A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.

Q2: What are the MOQ and leading time?

A: 200000pcs each type; leading time is within 35 days or based on your quantity;

Q3: What are the terms of payment?

A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C  are acceptable.

Q4: How to keep us away from risk?

A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.