Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Ceeto Mold has rich experience to design high quality plastic injection molds, here we summarize 6 key points how to design well about plastic injection molds.
Key point 1: Firstly we have to define plastic injection mold open direction and parting lines For each plastic product before you start to design plastic molds in order to make sure that core pulling slider structure can be reduced and parting line ‘s influence to plastic product can be eliminated.
Key point 2: Draft angle
Proper draft angle can avoid plastic part scrapping, smooth plastic part surface draft angle must be more than 1 degree and rough plastic part surface draft angle must be more than 1.5 degree.
Key point 3: Plastic part wall thickness
All kinds of plastic has a certain wall thickness range different from 0.5mm to 4mm. when wall thickness is over 4mm, it will cause long time cooling time and sink mark issues can be caused accordingly.
Key point 4: Reinforcement ribs
Reinforcement ribs can be well used in order to increase plastic product rigidity and reduce deformation.
Key point 5: Radius
Too small Radius may cause plastic product stress concentration and will lead to plastic product cracking. Therefore, design a reasonable Radius will improve plastic injection mold machining processing.
Key point 6: Holes
Try to simplify hole’s shape, normally round holes are applied, axis of holes direction should be the same as that of mold open direction in order to avoid core pulling application.
New plastic products or plastic sample parts are normally produced by plastic injection molds. Injection molds are usually made of a specified steel metal with good thermal conductivity. In addition...
PC plastic resin is polycarbonate which is widely used in plastic injection molding industry and because of its excellent mechanical properties, plastic injection molding business is one of our main...
Ceeto Company has been dedicated to design and manufacture plastic injection mold for over 10 years, business refers to Automotive Industry, Home Appliance Industry, Daily Commodities Industry,...
The greatest quantities of plastic parts are made by injection molding. The process consisits of feeding a plastic compound in powdered or granular from from a hopper through metering and melting...
Email to this supplier
March 04, 2020
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.